PSA/RLC
- PSA
- RLC

PSA for Electronic display Protection Film
It protects electronic display from scratches or external impact, and is mainly used in touch screens of smartphones. The electronic display protection film applied with silicone adhesive has superior workability (spreading/wetting) compared to other organic adhesives when attached to touch screens such as smartphones and tablet PCs. Thus, it is most often used for electronic display protection films.

PSA for Process Protection Film
Silicone adhesive has a lower surface tension than other organic products, so it registers excellent workability, heat resistance, and electrical properties. In particular, it is used as a protective film for primary and auxiliary materials in various processes that require heat resistance and electrical characteristics in the electrical and electronic industry.
Product Lists
Type | Product Code |
Properties | Features | |||
---|---|---|---|---|---|---|
Viscosity (25℃, cP) |
Solid contents (%) |
Adhesion (gf/in.) |
Heat Resistance (℃) |
|||
Peroxide Cure Type |
SG6001Z
|
35,000 | 56 | 850 | 230 | General Purpose |
SG6020Z
|
100,000 | 62 | 1,100 | 250 | High Adhesion | |
SG6040Z
|
50,000 | 56 | 850 | 280 | Good Heat Resistance | |
SG6060Z
|
135,000 | 62 | 950 | 250 | High Solid | |
Addition Cure Type |
SC3300L
|
70,000 | 100 | < 1 | - | Solventless |
SC6460A
|
70,000 | 100 | < 1 | - | Solventless | |
SC6421A
|
7,000 | 100 | < 1 | - | Low Viscosity, Solventless | |
SG6481A
|
40,000 | 50 | < 1 | - | Solvent Base & Good wetting | |
SG6801A
|
75,000 | 40 | < 1 | - | Solvent Base & Low Migration Type | |
SG6802A
|
85,000 | 60 | 1 | - | Solvent Base & Low Migration Type | |
SG6810A
|
85,000 | 60 | 10 | - | Solvent Base & Low Migration Type | |
SG6320A
|
15,000 | 60 | 200 | - | Middle Adhesion | |
SG6500A
|
25,000 | 60 | 950 | - | General Purpose | |
SG6501A
|
25,000 | 60 | 950 | - | Good Heat Resistance | |
SG6510A
|
15,000 | 58 | 900 | - | Hard Surface Type (Low Tack) |
|
SG6710A
|
30,000 | 60 | 900 | - | Soft surface Type (High Tack) |
|
SG6715A
|
8,000 | 58 | 1,500 | - | High Adhesion | |
SG6750A
|
30,000 | 60 | 900 | - | Low Pt type for TPU | |
SG6940A
|
30,000 | 60 | 950 | - | For Silicone Rubber | |
SG6950A
|
30,000 | 60 | 950 | - | High Adhesion for Silicone Rubber | |
SG6207A
|
30,000 | 60 | < 1 | - | Low Temperature Cure Low adhesion | |
SG6237A
|
15,000 | 60 | 350 | - | Low Temperature Cure Middle adhesion | |
SG6277A
|
10,000 | 60 | 750 | - | Low Temperature Cure High adhesion | |
Primer |
SG6733A
|
13,000 | 30 | - | - | General Purpose |
Adhesion Promoter additives |
SG3951C
|
10 | 50 | - | - | For improving adhesion |
SG3955C
|
10 | 50 | - | - | For improving adhesion | |
Anchorage additives |
SC0050S
|
30 | 100 | - | - | For Urethane Primer Treated PET |
SC0052S
|
25 | 100 | - | - | For Corona Treated PET | |
Crosslinkers |
SC0016B
|
23 | 100 | - | - | General Purpose |
SC0025B
|
5 | 100 | - | - | For High Tack Type | |
Catalyst |
SK0010C
|
200 | 100 | - | - | Pt Catalyst (5,000ppm) |
Momentive Pressure Sensitive Adhesive and Release Coatings
Catalog
Check details about product

RLC for Release Paper/Release Film
Silicone release paper/release film, is laminated on the adhesive sides such as adhesive tapes, pressure-sensitive adhesive paper, and labels to protect the adhesive sides. Before customers use finished products, it prevents the substances from sticking to each other and allows them to peel off easily with the desired force during use.
Product Lists
Type | Product Code |
Properties | Features | |
---|---|---|---|---|
Viscosity (25℃, cP) |
Solid contents (%) |
|||
Solventless type |
SC1011A
|
200 | 100 | Low Viscosity Label & Tape Coating |
SC1033A
|
350 | 100 | Standard Viscosity Label & Tape Coating |
|
SC1035A
|
350 | 100 | Standard Viscosity PET Film Coating |
|
Solvent type |
SG1100A
|
1,100 | 30 | Low Viscosity |
SG1130A
|
13,000 | 30 | ||
SG1160A
|
50,000 | 60 | High Solid | |
SG1210A
|
1,100 | 30 | Slip Type | |
SG1250A
|
15,000 | 30 | Slip Type | |
SG1310T
|
17,500 | 30 | General product | |
SG1320A
|
1,000 | 30 | High Release Force RLC | |
SG1410A
|
15,000 | 30 | Fast Cure Type Product | |
SG1910A
|
550 | 13 | Writing on release coating surface | |
Controlled release additive |
SG1500A
|
55 | 51 | High efficiency for high release force range of modification |
SC0062A
|
510 | 100 | High efficiency for low release force range of modification |
|
Crosslinker |
SC0016B
|
23 | 100 | Standard Crosslinker |
SC0021B
|
98 | 100 | Fast Cure Type Crosslinker | |
Anchorage additive |
SC0050S
|
30 | 100 | For Urethane Primer Treated PET |
SC0052S
|
25 | 100 | For Corona Treated PET | |
Slip type additive |
SC0073A
|
25,000 | 100 | Provide the same slip properties as standard slip type SG1210A |
SC0075A
|
25,000 | 100 | Provide the same slip properties as slip type SG1250A |
|
Catalyst |
SK0011C
|
200 | 100 | Pt Catalyst (5,000ppm) |
High Release Coating / SG1320A
[PRODUCT INFORMATION]
Basic Physical Properties
[Appearance] Transparent, [Non-volatile matter] 30%, [Viscosity] 100~2,000cP
Product Features
Various peeling force [10 ~ 300gf/in], stable residual adhesion rate (more than 90%) compared to the existing CRA type.
Small change in peeling force over time under high temperature aging conditions, excellent solvent resistance.
Purpose
Release film for electrical and electronic applications: Graphite Masking Release Liner, ACF (Anisotropic Conductive Film) Release Liner, etc.
[Medium release coating conditions and Guide Form]
-
Coating Material
- 50㎛ Corona PET Application Amount
- 0.3±0.02 g/㎡ Curing Conditions
- 140℃ × 10sec
SG1410A | SG1320A | SC0016B | SC0052S | SK0011C | R-R(gf/in.),25℃,24Hr *1 | SAS(%),25℃,24Hr *2 |
---|---|---|---|---|---|---|
100 | - | 0.65 | 0.4 | 1 | 11 | 96 |
90 | 10 | 1.25 | 15 | 98 | ||
80 | 20 | 1.45 | 17 | 97 | ||
70 | 30 | 1.65 | 18 | 96 | ||
60 | 40 | 1.84 | 22 | 97 | ||
50 | 50 | 2.02 | 24 | 96 | ||
40 | 60 | 2.22 | 28 | 96 | ||
30 | 70 | 2.41 | 36 | 96 | ||
20 | 80 | 2.6 | 54 | 96 | ||
10 | 90 | 2.8 | 104 | 96 | ||
0 | 100 | 3 | 326 | 97 |
- *1 R-R(gf/in.) : Room Temperature Release force
- *2 SAS(%) : Subsequent Adhesion Strength