Consumer Goods
HCE



Product/Formulation Catalog
See more details in our catalog.
LSR
Our liquid silicone rubber has excellent strength and transparency and registers excellent injection moldability, so it is applied to various baby products and household products. Solid silicone rubber is used in various kitchen products due to its excellent thermal stability, mechanical properties, and molding workability. Silicones are used in everyday life and throughout the industry, and the scope of application is gradually expanding.

Product list
Product | Test method | General | |||||
---|---|---|---|---|---|---|---|
SL7220
|
SL7901
|
SL7230
|
SL7935
|
SL7240
|
SL7250
|
||
Mixing ratio | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | |
Appearance | ASTM E 1767 | Translucent | |||||
Viscosity [Pa·s]*1 | ASTM D 4287 | 220 / 220 | 290 / 290 | 260 / 260 | 290 / 290 | 330 / 330 | 350 / 350 |
Specific Gravity | ASTM D 792 | 1.11 | 1.11 | 1.11 | 1.10 | 1.12 | 1.13 |
Hardness [Shore A] | ASTM D 2240 | 20 | 25 | 30 | 35 | 40 | 50 |
Tensile strength [MPa] | ASTM D 412 | 6.5 | 6.0 | 7.0 | 8.0 | 8.5 | 9.5 |
Elongation [%] | ASTM D 412 | 950 | 800 | 800 | 700 | 750 | 700 |
Tear strength [N/mm] | ASTM D 624 B | 40 | 20 | 35 | 20 | 35 | 30 |
Food contact*2 | FDA, BfR | √ | √ | √ | √ | √ | √ |
- Curing condition : 170℃*10min press cure
- *1 : Shear Rate 10s-1
- *2 : Having technical files based on the defined test methods
- Caution) Typical property data values should not be used as specifications
Product | Test method | General | |||||
---|---|---|---|---|---|---|---|
SL7250-M
|
SL7260
|
SL7260-M
|
SL7270
|
SL7270-M
|
SL7280(H)
|
||
Mixing ratio | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | |
Appearance | ASTM E 1767 | Translucent | |||||
Viscosity [Pa·s]*1 | ASTM D 4287 | 350 / 350 | 330 / 330 | 200 / 200 | 300 / 300 | 330 / 330 | 400 / 400 |
Specific Gravity | ASTM D 792 | 1.12 | 1.13 | 1.12 | 1.13 | 1.12 | 1.14 |
Hardness [Shore A] | ASTM D 2240 | 51 | 60 | 58 | 66 | 65 | 78 |
Tensile strength [MPa] | ASTM D 412 | 9.9 | 9.5 | 8.5 | 9.3 | 9.0 | 8.0 |
Elongation [%] | ASTM D 412 | 625 | 600 | 400 | 410 | 400 | 350 |
Tear strength [N/mm] | ASTM D 624 B | 40 | 40 | 40 | 46 | 40 | 10 |
Food contact*2 | FDA, BfR | √ | √ | √ | √ | √ |

Silopren™ Self Bonding Silicones for Consumer Goods
-
SL80XX Series
When molding baby products with general liquid silicone, a separate post-curing process is required to meet the volatile content of 0.5% or less, which leads to increased power costs, labor costs, and decreased productivity. To solve this problem, KCC Silicone developed the SL80XX series and released the LSR that satisfies the EN 14350-2 standard without post-curing.
- - Low volatiles content
- - Save time and energy because there is no post-curing process
- - Excellent transparency and mechanical properties
Product list
Product | Test method | General | |||||
---|---|---|---|---|---|---|---|
SL8020
|
SL8040
|
SL8050
|
|||||
Mixing ratio | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | ||||
Appearance | ASTM E 1767 | Translucent | |||||
Viscosity [Pa·s]*1 | ASTM D 4287 | 300 / 300 | 300 / 300 | 350 / 350 | |||
Specific Gravity | ASTM D 792 | 1.12 | 1.12 | 1.13 | |||
Hardness [Shore A] | ASTM D 2240 | 23 | 40 | 50 | |||
Tensile strength [MPa] | ASTM D 412 | 8.0 | 9.0 | 10.0 | |||
Elongation [%] | ASTM D 412 | 900 | 700 | 500 | |||
Tear strength [N/mm] | ASTM D 624 B | 30 | 30 | 40 | |||
Food contact*2 | FDA, BfR | √ | √ | √ | |||
Volatile [%] | EN14350-2 | ≤ 0.4 | ≤ 0.4 | ≤ 0.4 |
- Curing condition : 170℃*10min press cure
- *1 : Shear Rate 10s-1
- *2 : Having technical files based on the defined test methods
- Caution) Typical property data values should not be used as specifications