LSR
- Electronics / Home Appliances
- Automotive
- Consumer Goods
- Health care
- Textile coating
SL7265A(H)
,
SL7265B(H)
- Superior injection workability
The SL7265A/B(H) reduces the surface resistance value to 1010~1011Ω, meeting the surface resistance criteria of 1012Ω or less required in electronic devices. With lower surface resistance, it minimizes static electricity generation when injecting various materials into electronic devices, enabling them to operate normally. Furthermore, this product maintains stability in surface resistance even when left at room temperature for extended periods, enhancing the stability of electronic devices.
SL7265A/B(H) possesses excellent flowability, making it suitable for various and complex injection molding operations. Its superior curing properties can enhance the durability of final products. As a molding process with an additional curing system, it emits almost no odor and produces no by-products, making it an environmentally friendly product. Additionally, with excellent transparency, it minimizes contamination in the field and facilities, and aids in monitoring products and identifying defects during the injection process, thereby improving manufacturing process efficiency.
OA Roller
Many rollers for OA equipment such as printers and copiers are currently being manufactured by applying silicone. LSR is a high heat-resistant product that can withstand a temperature of about 200℃ for a long time, and has a low compression shrinkage rate to ensure long-term printing reliability. The OA Roller is manufactured by enclosing the LSR on a metal core rod such as aluminum or SUS. In this case, it is important to attach the rod and LSR, and we supply a separate primer product.
Product list
| Product | Test method |
SL8335
|
SL8340
|
|---|---|---|---|
| Mixing ratio | A:B = 1:1 | A:B = 1:1 | |
| Appearance | ASTM E 1767 | Reddish Brown | Reddish Brown |
| Viscosity [Pa·s]*1 | ASTM D 4287 | 30 / 28 | 32 / 30 |
| Specific Gravity | ASTM D 792 | 1.06 | 1.07 |
| Hardness [Asker C] | ASTM D 2240 | 62 | 68 |
| Tensile strength [MPa] | ASTM D 412 | 4.0 | 5.0 |
| Elongation [%] | ASTM D 412 | 200 | 150 |
| Compression set [%] *2 | ASTM D 395 | 7 | 7 |
For HVI (High Voltage Insulator)
HCE for HVI registers excellent tracking, arc resistance with high electrical insulation. Furthermore, due to its excellent resistance to UV, weather and chemicals, it remains unchanged in various external natural environments (high temperature/humidity. marine/alpine). It is also widly used for electrical insulators, Surge Arrest, Hollow core, etc.
Insulators
Since liquid silicone is easy for injection molding and is simple to work with, it helps to improve productivity. Silicone is put to various applications such as insulators and surge arresters due to its excellent insulating properties, weather resistance and tracking resistance.
Hollow-core insulator
Hollow-core insulators are used as insulators for high voltage devices such as arrestors and bushings. It has excellent electrical properties such as tracking resistance and arc resistance, and is suitable for injection molding because of its low viscosity and excellent flowability.
Cable accessories
Safety comes first for cable accessories since they are buried outdoors or underground and used for a long time. We provide liquid silicone for insulation and semi-conductors that have been verified by our customers.
Primer
LSR has the disadvantage of being difficult to attach to plastics or non-ferrous metals such as FRP, TPU, or PE, so primer is a must-have product. The primer is sprayed or coated on the surface of the substrate and cured at an appropriate temperature. Our primer provides excellent adhesion to FRP and silicone.
Product list
| Product | Test method | Insulator | Hollow-core Insulator |
|
|---|---|---|---|---|
|
SL8601
|
SL8609
|
SL8740
|
||
| Mixing ratio | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | |
| Appearance | ASTM E 1767 | Gray, Light gray | Light gray | Light gray |
| Viscosity [Pa·s]*1 | ASTM D 4287 | 65 / 65 | 200 / 200 | 30 / 25 |
| Specific Gravity | ASTM D 792 | 1.08 | 1.11 | 1.15 |
| Hardness [Shore A] | ASTM D 2240 | 42 | 49 | 40 |
| Tensile strength [MPa] | ASTM D 412 | 6.0 | 8.0 | 7.5 |
| Elongation [%] | ASTM D 412 | 400 | 500 | 400 |
| Tear strength [N/mm] | ASTM D 624 B | 20 | 30 | 25 |
| Dielectric Strength [kV/mm] | ASTM D 149 | 25 | 25 | 25 |
| Product | Test method | Cable Accessories |
|---|---|---|
|
SL8640
|
||
| Mixing ratio | A:B = 1:1 | |
| Appearance | ASTM E 1767 | Translucent |
| Viscosity [Pa·s]*1 | ASTM D 4287 | 80 / 70 |
| Specific Gravity | ASTM D 792 | 1.08 |
| Hardness [Shore A] | ASTM D 2240 | 40 |
| Tensile strength [MPa] | ASTM D 412 | 7.0 |
| Elongation [%] | ASTM D 412 | 550 |
| Tear strength [N/mm] | ASTM D 624 B | 18 |
| Dielectric Strength [kV/mm] | ASTM D 149 | 25 |
Primer
Since LSR is difficult to adhere to plastic or non-ferrous metals such as TPU or PE, primer is a must-have product.
Primer is sprayed or coated on the surface of the substrate and then cured at an appropriate temperature for use.
Product list
| Product | Test method |
SL9801(K)
|
SL9805(S)
|
|---|---|---|---|
| Mixing ratio | 10 : 1 | 9 : 1 | |
| Appearance (A/B) | ASTM E 1767 | Translucent / Transparent | brown / transparent |
| Viscosity [Pa·s]*1 | ASTM D 4287 | 10 / 15 cP | 0.45 / 8 cP |
| Solvent | Silicone (Cyclosiloxane) | Hydrocarbon base | |
| Solid content [%] | 50 | 33 | |
| Substrate | TPU, PC | FRP, Al, Zn, Cu, Fe, SUS 304, glass |
|
| Curing time | 60min/70℃ | 20min/80℃ |
- *1 : Shear Rate 10s-1
Product/Formulation Catalog
Get more details in our catalog.
Automotive Parts
Typical automotive parts using LSR include connector seals, O-rings, and gaskets. These parts are specially manufactured using Oil bleeding LSR, which exudes silicone oil over time after molding, giving water and airtightness between socket and plug of electronic equipment. In addition, it improves assembling workability by reducing the frictional force of module manufacturing. These automobile parts are getting lighter and smaller, and more sophisticated and detailed parts can be manufactured through LIMS (Liquid Injection Molding System) using LSR.
LSR for Airbag Coating
Automotive airbags are usually manufactured by coating LSR on textile fabrics such as nylon and polyester.
Airbag coated with LSR improves its durability and protects the human body by maintaining air pressure for a certain period of time when inflated.
To achieve this performance, LSR for airbag coating is designed to have excellent adhesion to fabrics,
and also possesses flame retardancy and high tear properties.
[Recommended Products]
SL9051
,
SL9920
,
SL9052
,
SL9057
,
SL9819
Product list
| LSR Type | Cut & Sewn | One Piece Woven(OPW) | OPW Topcoat (Friction-reducting) |
||
|---|---|---|---|---|---|
| Airbag application |
DAB (Driver Airbag) PAB (Passenger Airbag) SAB (Side Airbag) KAB (Knee Airbag) |
CAB(Curtain Airbag) | |||
| Product |
SL9051
|
SL9052
|
SL9920
|
SL9057
|
SL9819
|
| Mixing ratio | A:B = 10:1 | A:B = 1:1 | A:B = 10:1 | A:B = 1:1 | A:B = 2:8 |
| Viscosity (Pa·s) (A / B) |
20 / 20 1) | 33 / 34 1) | 15 / 20 1) | 150 / 265 1) | 500 cP / 4700 cP 2) |
| Hardness 3) (Shore A) |
30 | 32 | 30 | 10 | |
| Tensile strength 4) (MPa) |
3 | 4.5 | 3.3 | 4.5 | |
| Elongation 5) (%) |
300 | 450 | 350 | 1500 | |
- 1) Rheometer shear rate 10 s-1 @ 25℃
- 2) Brookfield LVDV @ 25℃
- 3) After curing at 170℃ 10min, ASTM D 2240
- 4), 5) After curing at 170℃ 10min, DIN 53504
- 6) Coated fabrics, ISO 5981
LSR for Connector Seal
Typical automotive parts include connector seals, O-rings, and gaskets.
These parts are manufactured using Oil bleeding LSR, which exudes silicone oil over time after molding, giving water
and airtightness between socket and plug of electronic equipment.
In addition, it improves assembling workability by reducing the frictional force of module manufacturing.
In line with the trend of lightweight and miniaturization of automobile parts, LIMS (Liquid Injection Molding System) using LSR can produce more sophisticated and detailed parts.
Connector seal LSR
LSR for E-Mobility
Materials Solutions for E-Mobility and Electrification
The new era of e-Mobility requires new material solutions. KCC SILICONE offers Momentive's innovative silicone, from thermal management and battery solutions to cable and connector materials, from sensor coatings to adhesives and seals.
Solutions for E-MOBILITY and Electrical Materials
The new era of e-Mobility requires new material solutions. KCC SILICONE offers Momentive's innovative silicone, from thermal management and battery solutions to cable and connector materials, from sensor coatings to adhesives and seals.
Product/Formulation Catalog
Get more details in our catalog.
General-Purpose Liquid Silicone
General-purpose liquid silicone is a highly heat-resistant product that can withstand heat up to 200℃.
In addition, it is an eco-friendly product that does not generate by-products because it uses a small amount of platinum catalyst for additional curing.
Due to these characteristics, LSR is widely used in baby nipples, swimming bands, medical hoses, mouth pieces, etc.
For Self-Adhesive
Self-adhesive liquid silicone rubber (LSR) provides primer-free adhesion to a variety of substrates.
Double injection between plastic and silicone is possible, contributing to productivity improvement.
Silopren* LSR 2740
Product list
| Product | Test method | General | |||||
|---|---|---|---|---|---|---|---|
|
SL7220
|
SL7901
|
SL7230
|
SL7935
|
SL7240
|
SL7250
|
||
| Mixing ratio | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | |
| Appearance | ASTM E 1767 | Translucent | |||||
| Viscosity [Pa·s]*1 | ASTM D 4287 | 220 / 220 | 290 / 290 | 260 / 260 | 290 / 290 | 330 / 330 | 350 / 350 |
| Specific Gravity | ASTM D 792 | 1.11 | 1.11 | 1.11 | 1.10 | 1.12 | 1.13 |
| Hardness [Shore A] | ASTM D 2240 | 20 | 25 | 30 | 35 | 40 | 50 |
| Tensile strength [MPa] | ASTM D 412 | 6.5 | 6.0 | 7.0 | 8.0 | 8.5 | 9.5 |
| Elongation [%] | ASTM D 412 | 950 | 800 | 800 | 700 | 750 | 700 |
| Tear strength [N/mm] | ASTM D 624 B | 40 | 20 | 35 | 20 | 35 | 30 |
| Food contact*2 | FDA, BfR | √ | √ | √ | √ | √ | √ |
- Curing condition : 170℃*10min press cure
- *1 : Shear Rate 10s-1
- *2 : Having technical files based on the defined test methods
- Caution) Typical property data values should not be used as specifications
| Product | Test method | General | |||||
|---|---|---|---|---|---|---|---|
|
SL7250-M
|
SL7260
|
SL7260-M
|
SL7270
|
SL7270-M
|
SL7280(H)
|
||
| Mixing ratio | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | |
| Appearance | ASTM E 1767 | Translucent | |||||
| Viscosity [Pa·s]*1 | ASTM D 4287 | 350 / 350 | 330 / 330 | 200 / 200 | 300 / 300 | 330 / 330 | 400 / 400 |
| Specific Gravity | ASTM D 792 | 1.12 | 1.13 | 1.12 | 1.13 | 1.12 | 1.14 |
| Hardness [Shore A] | ASTM D 2240 | 51 | 60 | 58 | 66 | 65 | 78 |
| Tensile strength [MPa] | ASTM D 412 | 9.9 | 9.5 | 8.5 | 9.3 | 9.0 | 8.0 |
| Elongation [%] | ASTM D 412 | 625 | 600 | 400 | 410 | 400 | 350 |
| Tear strength [N/mm] | ASTM D 624 B | 40 | 40 | 40 | 46 | 40 | 10 |
| Food contact*2 | FDA, BfR | √ | √ | √ | √ | √ | |
- Curing condition : 170℃*10min press cure
- *1 : Shear Rate 10s-1
- *2 : Having technical files based on the defined test methods
- Caution) Typical property data values should not be used as specifications
-
SL80XX Series
When molding baby products with general liquid silicone, a separate post-curing process is required to meet the volatile content of 0.5% or less, which leads to increased power costs, labor costs, and decreased productivity. To solve this problem, KCC Silicone developed the SL80XX series and released the LSR that satisfies the EN 14350-2 standard without post-curing.
- - Low volatiles content
- - Save time and energy because there is no post-curing process
- - Excellent transparency and mechanical properties
Product list
| Product | Test method | General | |||||
|---|---|---|---|---|---|---|---|
|
SL8020
|
SL8040
|
SL8050
|
|||||
| Mixing ratio | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | ||||
| Appearance | ASTM E 1767 | Translucent | |||||
| Viscosity [Pa·s]*1 | ASTM D 4287 | 300 / 300 | 300 / 300 | 350 / 350 | |||
| Specific Gravity | ASTM D 792 | 1.12 | 1.12 | 1.13 | |||
| Hardness [Shore A] | ASTM D 2240 | 23 | 40 | 50 | |||
| Tensile strength [MPa] | ASTM D 412 | 8.0 | 9.0 | 10.0 | |||
| Elongation [%] | ASTM D 412 | 900 | 700 | 500 | |||
| Tear strength [N/mm] | ASTM D 624 B | 30 | 30 | 40 | |||
| Food contact*2 | FDA, BfR | √ | √ | √ | |||
| Volatile [%] | EN14350-2 | ≤ 0.4 | ≤ 0.4 | ≤ 0.4 | |||
- Curing condition : 170℃*10min press cure
- *1 : Shear Rate 10s-1
- *2 : Having technical files based on the defined test methods
- Caution) Typical property data values should not be used as specifications
Product/Formulation Catalog
Get more details in our catalog.
Health Care
Silicone rubber is made of a high-viscosity silicone polymer that combines both inorganic and organic properties and high-purity silica. Characteristically biocompatible and inert, it is widely applicable to various healthcare products.
Silicone products used in medical devices include.
- - Liquid silicone rubber (LSR) that can be easily processed by high-speed injection molding equipment with high tear strength and various hardness grades
- - Silicone rubber compound with excellent transparency, elasticity, high temperature, and chemical stability
- - Custom silicone formulations including antibacterial elastomers and X-ray-detectable, radiation-shielding materials
- - Special silicone elastomers such as liquid silicone rubber with high transparency like glass and UV curable silicone elastomer that does not require high-temperature process and self-lubricating LSR
Biopharmaceutical Production, Clinical Diagnosis and Instrumentation
Durable and resilient, silicone material is flexible and transparent,
and can be subjected to multiple sterilization processes.
Momentive offers a range of ISO 10993 and/or USP Class VI compliant silicones suitable
for pharmaceutical applications, with no added plasticizers or other organic additives.
Our Silopren* liquid silicone rubber (LSR) line cures quickly
when heated on standard injection molding equipment.
Our Tufel* series is suitable for applications requiring transparency and high elasticity.
Click on the links below to browse our leading products and all products suitable
for silicone tubing and production, clinical diagnostics, and instruments for biopharmaceuticals.
GO TO MOMENTIVE “Biopharm”
Catheters, Drainage and Suction Devices
For drainage and insertion devices, patient comfort, ease of use, and infection prevention are essential.
Our elastomeric soft silicones are available in a variety of hardness grades with no added plasticizers.
Our Silopren* liquid silicone rubber (LSR), used in a variety of applications, offers high thermal stability
and high tear strength, and can be easily molded into a variety of composite forms.
Our Tufel* brand silicone rubber compounds are formulated with transparent, high-tear-strength,
and optimized catalysts for extrusion and molding processes.
GO TO MOMENTIVE “Catheters”
Contact Lenses
Momentive's high-performance silicone helps contact lens manufacturers successfully innovate their products and address a variety of manufacturing challenges.
Momentive works with industry-leading experts to create premium silicone materials that help manufacturers create the next generation of silicone hydrogel contact lenses and enhance the experience and comfort of consumers.
GO TO MOMENTIVE “Contact Lenses"
Fluid and Drug Delivery Device
We offer a variety of silicone materials that meet USP Grade VI and/or ISO 10993 biocompatibility standards, including pump piping and immersion-free access valves.
Versatile and functional, Silopren* liquid silicone rubber (LSR) brand products feature high thermal stability and high tear strength and are available in a variety of hardness grades.
Our Tufel* silicone rubber compound brand products can be used alone or blended with low-history, medium-hardness materials to extend pump life.
The new self-lubricating Silopren LSR 4655SL product extends the functionality of molded parts by virtue of its extremely slippery surface.
GO TO MOMENTIVE “Fluid and Drug”
Respiratory and Anesthesia
Masks and devices used to administer respiratory therapy and anesthetics to patients must be durable,
remain functional after multiple washes, and feel comfortable in contact with the patient's skin.
This function is achieved by the thermal stability and high tear resistance of silicone.
Silopren liquid silicone rubber, which is put to a variety of applications,
has similar rubber-free properties and excellent heat resistance,
providing a long service life under dynamic stress.
Our Tufel* series offers high production rates with fast cure rates
and high tear strength with hard surface hardening properties,
making them excellent silicones for medical tubing and hoses.
GO TO MOMENTIVE “Respiratory and Anesthesia”
Surgical Instruments and Sterilization
Superior durability is essential for the soft grips used on surgical and dental instruments, as well as the mats and brackets for holding instruments in place during the sterilization process since they all undergo multiple sterilization processes. This requires silicones used in surgical instruments to have high thermal and chemical stability. Our Tufel* series is ideal for applications requiring transparency and complex molding flexibility, and each grade in this series comes in a variety of colors. Our Silopren* liquid silicone rubber (LSR) products quickly cure when heated on standard injection molding equipment, and our self-adhesive LSRs can be bonded to a variety of engineering thermoplastics and metal substrates without a primer or secondary process. Momentive's clear liquid silicone rubber used in surgical instruments is glass-clear and provides elastomeric functionality to light guides and endoscope constructs.
GO TO MOMENTIVE “Surgical Devices and Sterilization”
Wearable Electronic Equipment and Devices
Wearable medical devices, such as heart rate and blood sugar monitors, must be comfortable to wear and resistant to skin oils. The Silopren LSR series is durable, flexible, and biocompatible, making it ideal for wearable medical devices where comfort and aesthetics are important. Our UV-curable silicone elastomers are used for overmolding and encapsulation of temperature-sensitive electronics used in wearable medical devices, while the 47X9 self-adhesive liquid silicone rubber provides primer-free adhesion to polycarbonate substrates.
GO TO MOMENTIVE “Wearable Electronics/Devices”
Product/Formulation Catalog
Get more details in our catalog.
LSR for Textile Coating
LSR for textile coating is in liquid form, so it is applied for textile coatings for clothing and other industries.
It is not harmful to the human body and is sometimes applied to textile coatings for clothing in following the trend that favors the soft texture of silicone.
In addition, when coated on industrial fibers such as glass fiber, it has excellent heat resistance, water repellency, and weather resistance, thereby improving durability.
In some cases, LSR-coated fiber products with excellent flame retardancy performance are sometimes manufactured by mixing appropriate inorganic fillers and flame retardants.
Product list
| Product | Test method |
SL3331
|
SL3358
|
SL6300
|
SL6351
|
SL6352
|
SL6530
|
SL7740
|
|
|---|---|---|---|---|---|---|---|---|---|
| Mixing ratio | A:B = 10:1 | A:B = 1:1 | B:C = 100:3 | B:SL9300B = 100:0.3 | B:SL9300B = 100:0.3 | B:SL9300B = 100:0.3 | A:B = 1:1 | ||
| Appearance | ASTM E 1767 | Transparent | Translucent | ||||||
| Viscosity [Pa·s]*1 | ASTM D 4287 | 40 / 10 | 30 / 120 | 40 / 0.12 | 90 | 190 | 50 | 130 / 130 | |
| Specific Gravity | ASTM D 792 | 1.00 | 1.09 | 1.06 | 1.08 | 1.13 | 1.08 | 1.07 | |
| Hardness [Shore A] | ASTM D 2240 | 35 | 22 | 14 | 40 | 60 | 30 | 39 | |
| Tensile strength [MPa] | ASTM D 412 | 3.0 | 3.0 | 3.5 | 4.0 | 5.8 | 6.0 | 4.5 | |
| Elongation [%] | ASTM D 412 | 200 | 500 | 500 | 400 | 200 | 600 | 380 | |
| Tear strength [N/mm] | ASTM D 624 C | - | - | - | - | 20 | - | 15 | |
| ECO PASSPORT*2 | √ | √ | √ | √ | |||||
| Product | Test method |
SL9300
|
SL9055
|
SL9056
|
SL9602(P)
|
SL9061
|
SL9603
|
SL9903
|
SL9906
|
|---|---|---|---|---|---|---|---|---|---|
| Mixing ratio | A:B = 100:0.3 | A:B = 1:1 | A:B = 1:1 | A:B = 1:1 | A:B = 10:1 | B:SL9300B = 100:0.3 | A:B = 10:1 | A:B = 10:1 | |
| Appearance | ASTM E 1767 | Translucent | Translucent (Light Yellow) | White | Translucent | Ivory | |||
| Viscosity [Pa·s]*1 | ASTM D 4287 | 80 | 100 / 70 | 150 / 90 | 42 / 42 | 24 / 1.5 | 11 | 32 / 0.45 | 340 / 5.7 |
| Specific Gravity | ASTM D 792 | 1.10 | 1.09 | 1.05 | 1.07 | 1.16 | 1.01 | 1.04 | 1.23 |
| Hardness [Shore A] | ASTM D 2240 | 40 | 19 | 10 | 23 | 39 | 24 | 42 | 42 |
| Tensile strength [MPa] | ASTM D 412 | 5.0 | 4.0 | 4.0 | 4.0 | 40 | 1.5 | 5.0 | 5.5 |
| Elongation [%] | ASTM D 412 | 500 | 750 | 1450 | 600 | 360 | 300 | 250 | 500 |
| Tear strength [N/mm] | ASTM D 624 C | 20 | - | - | - | - | - | 20 | 17 |
| ECO PASSPORT*2 | √ | √ | √ | √ | |||||
- Curing condition : 170℃*10min press cure
- *1 : Shear Rate 10s-1
- *2 : Having technical files based on the defined test methods
- Caution) Typical property data values should not be used as specifications
Product/Formulation Catalog
Get more details in our catalog.
